diff --git a/resource-overlay/device/Frameworks/res/values/config.xml b/resource-overlay/device/Frameworks/res/values/config.xml
index 4392fb0..d8433c7 100644
--- a/resource-overlay/device/Frameworks/res/values/config.xml
+++ b/resource-overlay/device/Frameworks/res/values/config.xml
@@ -4,13 +4,6 @@
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
-    <!-- Indicate whether to allow the device to suspend when the screen is off
-         due to the proximity sensor.  This resource should only be set to true
-         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
-         Otherwise, the device may fail to wake out of suspend reliably.
-         The default is false. -->
-    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
-
     <!-- Vibrator pattern for feedback about a long screen/key press -->
     <integer-array name="config_longPressVibePattern">
         <item>0</item>
@@ -153,21 +146,6 @@
     <!-- MMS user agent prolfile url -->
     <string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/motov1/Profile/motov1.rdf</string>
 
-    <!-- ComponentName of a dream to show whenever the system would otherwise have
-         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
-         try to start this dream if possible.  The dream should typically call startDozing()
-         to put the display into a low power state and allow the application processor
-         to be suspended.  When the dream ends, the system will go to sleep as usual.
-         Specify the component name or an empty string if none.
-
-         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
-         Doze dreams will run whenever the power manager is in a dozing state. -->
-    <string name="config_dozeComponent" translatable="false">com.android.systemui/com.android.systemui.doze.DozeService</string>
-
-    <!-- If true, the doze component is not started until after the screen has been
-         turned off and the screen off animation has been performed. -->
-    <bool name="config_dozeAfterScreenOffByDefault">true</bool>
-
     <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
     <string name="config_dozeDoubleTapSensorType" translatable="false">org.lineageos.sensor.double_tap</string>
 
@@ -183,45 +161,6 @@
          during initialization when the setting is still null. -->
     <bool name="config_dozeAlwaysOnEnabled">false</bool>
 
-    <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
-         device from the display on/off state.
-
-         When false, autosuspend_disable() will be called before the display is turned on
-         and autosuspend_enable() will be called after the display is turned off.
-         This mode provides best compatibility for devices using legacy power management
-         features such as early suspend / late resume.
-
-         When true, autosuspend_display() and autosuspend_enable() will be called
-         independently of whether the display is being turned on or off.  This mode
-         enables the power manager to suspend the application processor while the
-         display is on.
-
-         This resource should be set to "true" when a doze component has been specified
-         to maximize power savings but not all devices support it.
-
-         Refer to autosuspend.h for details.
-    -->
-    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
-
-    <!-- Power Management: Specifies whether to decouple the interactive state of the
-         device from the display on/off state.
-
-         When false, setInteractive(..., true) will be called before the display is turned on
-         and setInteractive(..., false) will be called after the display is turned off.
-         This mode provides best compatibility for devices that expect the interactive
-         state to be tied to the display state.
-
-         When true, setInteractive(...) will be called independently of whether the display
-         is being turned on or off.  This mode enables the power manager to reduce
-         clocks and disable the touch controller while the display is on.
-
-         This resource should be set to "true" when a doze component has been specified
-         to maximize power savings but not all devices support it.
-
-         Refer to power.h for details.
-    -->
-    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
-
     <!-- The bounding path of the cutout region of the main built-in display.
          Must either be empty if there is no cutout region, or a string that is parsable by
          {@link android.util.PathParser}.
@@ -287,10 +226,4 @@
         <item>2164</item> <!-- sensorLocationY -->
         <item>91</item> <!-- sensorRadius -->
     </integer-array>
-
-    <!-- Whether the device enable the standalone (SA) mode of 5G NR.-->
-    <bool name="config_telephony5gStandalone">true</bool>
-
-    <!-- Whether the device enable the non-standalone (NSA) mode of 5G NR.-->
-    <bool name="config_telephony5gNonStandalone">true</bool>
 </resources>